EMBOSSING MACHINE MOD.GF-ME 520

The machine consists of a sturdy steel structure housing the return rollers, the embossing counter rollers and the embossing roller unit.

The function of the return cylinders is to turn the material over before it enters the embossing machine and to guide it to the exit of the machine.

The two counter cylinders are made of thick-walled tubing and are mounted on supports fixed to the side panels. Their movement is provided by a gear motor driven by an inverter and a gear transmission system.

The embossing cylinder consists of a thick tube with a rhomboidal mesh pattern. Above the embossing cylinder are the heating elements used to heat the embossing relief and maintain it at the set temperature.

The material to be embossed is pulled over the two counter cylinders while the embossing cylinder rotates above it and imprints the pattern at the points of contact.

Working width: up to 4000 mm

Speed of first pair of cylinders: 1÷10 m/min

Speed of second pair of cylinders: 2÷20 m/min

Speed of third pair of cylinders: 4÷30 m/min

Distance between cylinders: 120 mm

Cylinder diameter: 100 mm

Installed power: 4.5 kW

Compressed air requirement: 6 bar/200Nl/h